• <acronym id="wf3z5"><label id="wf3z5"></label></acronym>
  • <li id="wf3z5"></li>

     
    Home Company News Products Feedback Contact Us Mail
    > H-beam Production Line
    > Welding Rotators
    > Welding Positioner
    > Welding Manipulator
    > CNC Cutting Machine
    > H-beam Combination Workstation
    > Box Beam Production Line
    > High Frequency Welded Pipe Unit
    > Shot Blasting Machine
    > Milling and Beveling Machines
    > End Face Milling Machine
    > Pipe Welding Machine
    > Strip Cladding Welding System
    Contact Us

    Address: 100# Tianshun Road, Huishan Dist., Wuxi City, Jiangsu, China

    Tel: +86-510 83050687
    Fax: +86-510 83050787
    Website: www.hlwjzl.com
    E-mail: guoheng@guohengjx.com

    Products
    Hydraulic type Fit-up Tank Rotator

    1. Introduction

     

    This series is used for assembly or fit-up of long pipe or tank as wind tower, tank vessel, etc. Adjusting roller UP and DOWN through oil cylinder to gain an accurate alignment of two pipes, and then to weld. It works with conventional type turning roll to realize the section to section assembly by means of “1+1” mode or “1+n” mode (also called growing line). We also provide tailor-made welding rotator according to your special requirements.

     

    2. Main Parameters


    Model

    GZD30

    GZD60

    Max loading T

    30

    60

    Suit diameter mm

    Min

    1000

    2000

    Max

    4000

    6500

    PU Roller mm

    Dia 

    400

    450

    Width

    220

    240

    Linear speed m/h

    6--60

    Speed Control

    VFD

    Above are our standard models and parameters, and it can be designed and manufactured on request.

              *We reserve the right to alter specifications without prior notice.

     

    3. Main features


    The standard models of our roller beds have the following features:

    *  This welding turning roll consists of unpowered fit-up roller bed, hydraulic unit and electric control system, etc.

    *  Heat treatment to main welding parts after welding; sand blasting treatment to main welding parts before painting;

    *  Upper surface of base is treated with fine machining;

    *  The turning rolls are PU rollers. The core of the rollers are cast-iron clad with PU material

    *  The four rollers on the turning roll are driven by four oil cylinders separately. It can realize simple operation or simultaneous running at the same side of the two oil cylinders through control, convenient and quick.

    *  Hand pendant;

    *  Main electric elements are ABB/Siemens brands;

    *  Lifting lug on the base of roller bed;

    *  Standard color:

     

    Optional features:


    *  Roller material options: Metallic or Rubber roller;

    *  Interface for integral control with welding column&boom;

    *  Foot switch;

     

    4. Supply range

     

    *  Hydraulic type fit-up turning roll                                                                          1set

    *  Electric control system [including 1piece of electric control cabinet, 1piece of remote control box with cable 6m]                                                                                                             1set

    *  Technical documents (with manual book, conformity certificate, packing list, etc)      1set

     

    5. Reference photo

     

     

     

     

    Previous:Lead-screw Tank Rotator(2T—40T)
    Next:Tank Rotator for Sand Blasting
        
         
    COPYRIGHT ? 2012 WUXI GUOHENG MACHINERY CO., LTD. Copyright
    Address: 
    100# Tianshun Road, Yangshan Associated Industrial Park, Huishan Economic Development Zone, Wuxi City, Jiangsu, China 
    Fax: +86-510 83050787 Tel: +86-510 83050687  Website: www.hlwjzl.com  E-mail: guoheng@guohengjx.com
    蘇ICP備:09032126號-1
    Wuxi Networks:Juntong
    自慰流水喷白浆免费看

  • <acronym id="wf3z5"><label id="wf3z5"></label></acronym>
  • <li id="wf3z5"></li>