• <acronym id="wf3z5"><label id="wf3z5"></label></acronym>
  • <li id="wf3z5"></li>

    Home Company News Products Feedback Contact Us Mail
    > H-beam Production Line
    > Welding Rotators
    > Welding Positioner
    > Welding Manipulator
    > CNC Cutting Machine
    > H-beam Combination Workstation
    > Box Beam Production Line
    > High Frequency Welded Pipe Unit
    > Shot Blasting Machine
    > Milling and Beveling Machines
    > End Face Milling Machine
    > Pipe Welding Machine
    > Strip Cladding Welding System
    Contact Us

    Address: 100# Tianshun Road, Huishan Dist., Wuxi City, Jiangsu, China

    Tel: +86-510 83050687
    Fax: +86-510 83050787
    Website: www.hlwjzl.com
    E-mail: guoheng@guohengjx.com

    Automatic Height Controller-Hypertherm Sensor PHC


    The Sensor PHC is an easy-to-use and reliable voltage-sensing height control for conventional plasma applications. The benefits realized are substantial in terms of:

    • Consumable life improvement
    • Improved cut quality
    • Reduced operator intervention

    The Sensor PHC offers easy installation on new or existing conventional plasma cutting tables with any CNC and a broad range of plasma systems. Available in several application-specific configurations, the Sensor PHC delivers improved performance at a reduced cost compared to other height control solutions.

    Better consumable lifeSpatter during piercing presents a threat to the nozzle and shield.Setting the height of the torch higher during piercing protects the consumables by moving them away from the spatter.The Sensor PHC offers programmable and different settings for both pierce and cut heights to automatically position the torch.
    Improved cut quality performanceThe Sensor PHC offers improved quality over the entire life of the consumables.The following cut-edge angle dimensions were measured at the beginning and end of a 450 pierce-and-cut test for both setups.

      1st cut sample,
    maximum kerf angle
    451st cut sample,
    maximum kerf angle
    No PHC 11°
    Sensor PHC
    Angles were measured on all four sides, all four samples. The lower the number, the better the cut quality. The angles will vary with thickness

    Magnetic breakawayTethered magnetic breakaway for consistent positioning during cutting and retention after collision or consumable change.

    Powerful magnets and keyed mounting plate for fast and repeatable repositioning of the torch.


    Maximum speed 5120 mm/m (200 ipm)
    Range of motion 150 mm (6")
    Arc voltage set-point 50 V – 210 V arc voltage set-point for arc-voltage feedback; accurate to 1 arc-volt
      Ohmic contact and stall-force initial height sense
      On/off signal provided by CNC
    * Information subject to change without notice.
    ** User supplied display and keyboard are required

    Previous:Triple torch
    100# Tianshun Road, Yangshan Associated Industrial Park, Huishan Economic Development Zone, Wuxi City, Jiangsu, China 
    Fax: +86-510 83050787 Tel: +86-510 83050687  Website: www.hlwjzl.com  E-mail: guoheng@guohengjx.com
    Wuxi Networks:Juntong

  • <acronym id="wf3z5"><label id="wf3z5"></label></acronym>
  • <li id="wf3z5"></li>