• <acronym id="wf3z5"><label id="wf3z5"></label></acronym>
  • <li id="wf3z5"></li>

    Home Company News Products Feedback Contact Us Mail
    > H-beam Production Line
    > Welding Rotators
    > Welding Positioner
    > Welding Manipulator
    > CNC Cutting Machine
    > H-beam Combination Workstation
    > Box Beam Production Line
    > High Frequency Welded Pipe Unit
    > Shot Blasting Machine
    > Milling and Beveling Machines
    > End Face Milling Machine
    > Pipe Welding Machine
    > Strip Cladding Welding System
    Contact Us

    Address: 100# Tianshun Road, Huishan Dist., Wuxi City, Jiangsu, China

    Tel: +86-510 83050687
    Fax: +86-510 83050787
    Website: www.hlwjzl.com
    E-mail: guoheng@guohengjx.com

    T / I / H Beam Automatic Welding Line

    Quick Details


    • “Beam Welding Line” automatic, two heads submerged arc-welding lines for T / I girder beam.
    • 2sets of American Lincon DC-1000, NA-3S SAW welding system to ensure good welding quality;
    • Japan Mitsubishi PLC controller;
    • Hydraulic type post deformation device to straighten the beam;
    • The beam is fed into the machine and both sides of the beam are welded simultaneously. 
    • Save space and economize workshop; shorten the production time and improve the efficiency;
    • Economize the investment of crane equipment and operator;



    2. Main Parameters


    Model ZHJ18
    Suitable web height mm 200—1800
    Suitable web thickness mm 6—32
    Suitable flange width mm 200—800
    Suitable flange thickness mm 6—40
    Straightening thickness mm 6—35
    Fillet height mm ≦8
    Work-piece length mm 4000—15000
    Feeding speed m/min 0.2—2 (VFD)
    Input conveyor m 3conveyorss, each 2.6m (one powered)
    Output conveyor m 11.5m, including lift conveyor
    Machine power kW 18.1
    Power supply AC380V, 50HZ, 3P or tailor made
    Above are our standard models and parameters, and it can be designed and manufactured on request.

        *We reserve the right to alter specifications without prior notice.



    3. Introduction


    H-beam combination workstation is used for H-beam or T-beam assembly, welding and straightening. It centralize the assembly, welding and straightening functions on one machine which saves space and economize workshop.Reduce workflows: shorten the production time and improve the efficiency. Economize the investment of crane equipment and operator.


    • These machines are specifically designed for the manufacture of welded “T” and double “T” girder-beams with parallel or converging flange.
    • They enable the welding to be carried out on items with the web located vertically and without any need for tacking.
    • Tacking will only be required at the top in order to obtain the proper angle between the web and the flange.
    • When double “T” beams are being manufactured, once the first flange has been welded, the beam is flipped over and fed back into the unit once again.
    • This machine is capable of welding both symmetrical and non-symmetrical beams without the need for tacking;
    • A flange post-deformation device mounted at the machine exit enables the machine to compensate for any flange deformation resulting from the welding process.
    • This device is easily adjustable to handle various flange dimensions and a variety of different deformable thicknesses up to a maximum of 40 mm at maximum width.
    • The welding line can be equipped with a control PLC from Mitsubishi.



    4. Reference Photos

    Next:H-beam Combination Workstation for Assembly, Welding and Straightening
    100# Tianshun Road, Yangshan Associated Industrial Park, Huishan Economic Development Zone, Wuxi City, Jiangsu, China 
    Fax: +86-510 83050787 Tel: +86-510 83050687  Website: www.hlwjzl.com  E-mail: guoheng@guohengjx.com
    Wuxi Networks:Juntong

  • <acronym id="wf3z5"><label id="wf3z5"></label></acronym>
  • <li id="wf3z5"></li>